Streetglow LED License Plate Frame Manuel d'utilisateur télécharger pdf

CONTENTS:

1 - LED License Plate Frame

1 - LED Controller (LC4)

All necessary mounting hardware

Quick Test Sequence

Step 1 Unpack entire contents of package and check for any

damaged products before moving to the test sequence.

Step 2 Place LED License Plate Frame on a test area and plug

the control wire into any one of the four available ports

on the back of the LED Controller (LC4).

Step 3 Using a 12v DC power source, connect the LC4’s RED

(ignition) and YELLOW (power) wires to the positive (+)

12v lead of the power source.

Note: DO NOT connect

the BLUE (alarm) wire for this test.

Step 4 Connect the LC4’s BLACK (ground) wire to the power

supply’s negative (-) output.

Step 5 Press and hold the ON/OFF button to activate all LED

segments. NOTE: If none of the LED’s light up, then

go back to Step 2 and check your connections.

Installation Instructions

Step 1 Select the desired location for the LED Controller (LC4)

and mount using the supplied mounting hardware.

Step 2 With the LC4 mounted make connections of power and

ground to the LC4’s power harness.

YELLOW wire = 12v battery (+)

RED wire = 12v ignition (+)

BLACK wire = ground (-)

BLUE wire = alarm (-) input (optional connection)

NOTE: Vehicles with aftermarket alarms can use the

LED License Plate Frame’s alarm feature to activate

when ignition kill is enabled with a negative trigger.

Step 3 Mount the LED License Plate Frame to the vehicle using

screws provided.

Step 4 Run the control wire to the back of the LC4 and plug into

one of four available ports.

Step 5 Once the wiring and mounting of all components are

complete, test the LED License Plate Frame’s sequential

lighting effects.

All StreetGlow products are covered by a comprehensive warranty.

StreetGlow neon products are warranted against defective materials and workmanship for

as long as the original purchaser owns the product. StreetGlow Radio Bars and other

non-neon products (excluding fog and driving lights, and HID bulbs) are warranted against

defective materials and workmanship for two years from date of purchase. Fog and driving

lights, and HID bulbs are warranted for one year from date of purchase. Any product that

should fail for either defective materials or workmanship will be repaired or replaced, at

StreetGlow’s option, as the sole remedy of the buyer. Proof of purchase is required.

All warranty claims are to be handled by selling agents. Accident, abuse, neglect,

modifications, broken glass, labor, transportation, improper installation and the use of

products other than for their intended purposes are not covered. NEITHER SELLER NOR

THE MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE,

DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED

TO INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST

SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR

CONSEQUENTIAL LOSS), ARISING OUT OF THE USE OR THE INABILITY TO

USE THE PRODUCT AND THE USER AGREES THAT NO OTHER REMEDY SHALL

BE AVAILABLE TO IT. Before using, the user shall determine the suitability of the product

for the intended use, and user assumes all risk and liability whatsoever in connection

therewith. Some states and countries do not allow the exclusion or limitation of incidental

or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights, which

vary from state to state and from country to country. DISCLAIMER: THE FOREGOING

WARRANTY IS AN EXCLUSIVE WARRANTY IN LIEU OF ANY OTHER EXPRESS

WARRANTIES. ANY IMPLIED WARRANTIES (INCLUDING, BUT NOT LIMITED

TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE) TO THE EXTENT THAT IT COULD APPLY TO ANY OF

THE PRODUCTS MANUFACTURED BY THE COMPANY SHALL BE LIMITED IN

DURATION TO THE PERIODS OF THE EXPRESS WARRANTY GIVEN ABOVE.

LED Controller (LC4) Operation

Turn unit on by pressing and holding ON/OFF button for 2 seconds

Turn unit off by pressing and holding ON/OFF button for 2 seconds

Change pattern by pressing PATTERN button

Increase speed/sensitivity by pressing + button

Decrease speed/sensitivity by pressing – button

Modes and Sequential Lighting Effects

MODES: All LED’s On/Music Interface/Sequential Lighting Effects

Turn unit on and select the desired mode of operation pressing

the FUNCTION button.

Main Functions

1st Press FUNCTION button = All LED’s On Mode

2nd Press FUNCTION button = Music Interface Mode (dances to

the beat of your music)

NOTE: Use the +/- buttons to adjust the sound sensitivity

3rd Press FUNCTION button = Sequential Lighting Effects Mode

(starts in DEMO)

NOTE: Use the +/- buttons to adjust the pattern speed

When the LC4 is in Sequential Lighting Mode, you are

able to select up to 8 different lighting effects by

pressing the PATTERN button.

Alarm Feature

The LED License Plate Frame’s alarm feature activates when the

BLUE (alarm) wire is triggered with a negative (ground) input.

NOTE: This feature functions ONLY when the vehicle is off. When the

alarm feature is active, the top center bank of LED’s will flash once per

second.

LED LICENSE PLATE FRAME

WARNING!

The retailer shall not be held responsible for any damages that occur

as a result of defective products. StreetGlow products are recommended

for show and off-road use only. Laws concerning the use of aftermarket

lighting products may vary from state to state. For more information,

please check with your local authority.

Design and specifications are subject to change without notice.

++ ––

FUNCTION

ON / OFF

PATTERN SENSITIVITY / SPEED

YELLOW =

RED =

BLUE =

BLACK =

12v Batt. (+)

12v Ign. (+)

Alarm (-)

Ground (-)

LED CONTROLLER (LC4)

1 2

LED LICENSE PLATE FRAME 1

Résumé du contenu

Page 1 - LED LICENSE PLATE FRAME

CONTENTS:1 - LED License Plate Frame1 - LED Controller (LC4)All necessary mounting hardwareQuick Test SequenceStep 1 Unpack entire contents of package

Page 2

LED LICENSE PLATE FRAME

Commentaires sur ces manuels

Pas de commentaire

Streetglow LED License Plate Frame Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Streetglow LED License Plate Frame. StreetGlow LED License Plate Frame User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Streetglow LED License Plate Frame